🚀 Onboarding Your MikroTik with ISPMan

Welcome! Follow these simple steps to get your MikroTik device connected to our system. Once you're done, we'll handle everything else automatically — zero hassle for you. 🙌

📋 Prerequisites

Before you begin, ensure your MikroTik device meets these requirements:

RouterOS Version: 7.18.2 or higher
Check your version in Winbox under System → Resources
Required Packages: Either wireless or wifiwave2 package installed
Check installed packages in Winbox under System → Packages
💡 Note: Most low-end devices only support the wireless package, while high-end devices support the newer wifiwave2 package.

🔗 Step 1: Go to Your Device Page

Navigate to your device page in the ISPMan portal. If you haven’t created one, go to Devices → Add Device.

⬇️ Step 2: Download the Setup Script

On your device page, click the “Download Script” button. This will download a file named: ispman.rsc.

📡 Step 3: Connect to Your MikroTik via Winbox

Open Winbox and connect to your MikroTik router. Here’s how:

Download Winbox from mikrotik.com/download
Launch Winbox and scan for your device under the “Neighbors” tab.
Select the MAC address and log in with your MikroTik admin credentials.

📥 Step 4: Import the Script

Inside Winbox:

Go to Files in the left menu.
Drag and drop ispman.rsc into the Files window.
Open the Terminal (from left menu).
Run this command:
/import ispman.rsc

🚀 That’s it!

You’re all set — once the script is imported, we’ll automatically detect the device, apply configurations, and connect it to your account. No further action needed.

Need help? Contact support via the chat icon or email us at [email protected].